
POSIFLOW
Positions that design themselves.
Select your moving lights, tap a height, a shape and how wide it opens, and PosiFlow calculates every beam from where each fixture really is: hanging, standing or on its side, on straight trusses, circles or towers. Calibrate just one position and every look after that is geometrically exact, stored in your pool as a preset with its own picture.


Every preset PosiFlow stores lands in your pool with its own picture, coloured by height: Mid, Center, High, Highest.
Try looks on the fly, or build your whole pool
Try looks on the fly
Tap a height and a shape and your fixtures go there. Tap again to release. Fine-tune it in the EDITOR, with dials showing the exact value, and store it as a preset when it looks right.
Build your position pool
Pick heights and shapes from five families, fans, cross · split, house · focus, specials and wild, choose how wide they open, from TIGHT to MAXIMUM, and store them all as presets in one go, merged or duplicated, at the slot you choose.
Adjust a height, every look follows
Every preset PosiFlow creates keeps its tilt linked to a height reference. Rig hung higher tomorrow? Adjust Mid once and every Mid preset follows, pan untouched.
Inverted fixtures found and fixed in seconds
Load your selection and PosiFlow splits it by fixture type. Test pan and tilt type by type, see at a glance what is inverted in DMX or in the encoder, and fix it with one tap.

One calibration, every look right
Bring your fixtures to CENTER, correct them with the encoders and tap APPLY. PosiFlow keeps each fixture's offsets and its own path, sends beams to the audience or radial on circles, and treats audience lighting differently from the stage.

Fine-tune without losing the shape
Open any preset and nudge tilt, pan and open in steps you choose, fixture by fixture or all together. Shape the whole selection with full MAtricks, X / Y / Z with Block, Group, Wings and Width, mirror it without crossing the second wing, then update the preset or store it as a new one.

From patch to show, one step at a time
The start screen shows your rig in numbers, the state of every step, the report of your show and a CONTINUE button to the next one.

Built for real rigs
Calibrate once
Put your fixtures at CENTER, correct them with the encoders and tap APPLY. That single position is all PosiFlow needs.
Any fixture, any way it hangs
Hanging, standing, on its side or rotated in the patch. Every fixture is calculated from its own position and rotation.
No flips between looks
Every fixture takes the shortest path and stays on its side of tilt, so beams never swing across the stage between presets.
Amplitude in four levels
TIGHT, MEDIUM, WIDE or MAXIMUM. Fans, crosses, houses and splits open in metres, so the look does not depend on how high the truss is, and they stay inside closed stages.
LED bars and strobes too
Fixtures with tilt only take the same heights as the rest of the rig.
Every stage at once
Fixtures from all the stages in your show work together in one go.
Radial
On circles and arcs, beams fan out perpendicular to the structure, so a round truss looks round.
Audience lighting
Detect the fixtures around the house and they aim into the room, while the rest of the rig aims at the stage.
English and Spanish
Switch the language at any time from the plugin header.
Requirements
- grandMA3Software 2.5.x
- HardwaregrandMA3 consoles and onPC for Windows
- LicenceYour own USB stick, 2 sticks per licence
- LanguagesEnglish, Spanish
- ManualUser manual in English and Spanish, included in the download
FAQ
Do all my fixtures need to hang the same way?
No. Hanging, standing or on their side, mixed in the same selection: each one is calculated from its own position and rotation in the patch.
How precise is it?
Every beam is calculated from your 3D, so the geometry is exact. On stage it is as accurate as your 3D: if the real rig differs from the plot, ALIGN corrects it in one pass.
What if the rig is hung higher or lower tomorrow?
PosiFlow's presets follow their height references: adjust Mid, High or Highest once and every preset at that height follows.
Will it touch my own presets?
No. You choose the slot and whether to merge or duplicate, and PosiFlow only deletes the presets it created itself.
What if I change rental desk every show?
Your licence lives on your USB stick, not on the console. Plug it into any grandMA3 and go.
Program your next show's positions in minutes
Or get PosiFlow and PatchPilot together in the SHOWUNFOLD Pack.
